2.14.3
Play between the roller and the control cam
2
1
Caution: Risk of injury!
Turn off the main switch.
Check and set the thread trimmer cylinder only when the machine is
switched off.
Standard checking
The cylinder should be set in a way that between roller 2 and thread
trimmer cam 1 approx. 0.1 mm clearance exists.
–
Check the distance between the roller 2 and the thread trimmer
cam 1.
Correction
–
Adjust the threaded pin 3 accordingly.
Clockwise
Counter-clockwise
–
Check the distance.
3
= less distance
= more distance
GB
39