Duerkopp Adler 609 Instruction Manual page 23

Sewing continuous seam
without attaching stitches
In mid-seam
(only valid with sewing
continuous seam)
Interrupt the sewing process
Resume the sewing process
At the seam end
with thread trimming
without thread trimming
- Prerequisite: on the operating panel
the key has its LED OFF
B
- Prerequisite: on the operating panel
the key (one stitch basting)
has its LED OFF
- Push pedal forwards and keep it pushed.
- The machine sews at the speed of
rotation set by the pedal.
- Feed the material manually
Even during the continuous seam, it is
possible to sew a single stitch by pushing
briefly the pedal!
- Release pedal (rest position).
The machine stops in the needle up position
- Each time that the pedal is pushed briefly
the machine execute exactly one stitch.
If you actuate the pedal longer
the machine will sew continuously.
- Push the pedal forwards. The sewing
machine sews at the speed of rotation
set by the pedal.
- Push pedal backwards and keep it pushed.
- The thread will be cut
- Sewing foot in highest position
(reverse function)
The material can be removed.
- Push pedal backwards and keep it pushed.
- Sewing foot in highest position
(reverse function)
- The material can be removed.
The threads must be cut manually
GB
21