Lenovo ThinkStation C30 Hardware Maintenance Manual page 120

7. Gently press down the small handle
until it is in the fully open position.
Figure 47. Opening the microprocessor retainer
8. Touch only the edges of the microprocessor and carefully lift it straight up and out of the microprocessor
socket. Place the old microprocessor on a static-protective surface.
Notes:
• Do not touch the gold contacts on the bottom of the microprocessor.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
Figure 48. Removing the microprocessor
9. Touch the static-protective package that contains the new microprocessor to any unpainted surface on
the outside of the computer. Then, remove the new microprocessor from the package.
114
ThinkStation Hardware Maintenance Manual
2 to open the microprocessor retainer. Pivot the retainer upward