Installation; Unpacking; Warranty Card; Break-In Period - Cary Audio Design PH 302 MKII Owner's Manual

Vacuum tube phono preamplifier
Hide thumbs Also See for PH 302 MKII:
Table of Contents

Advertisement

INSTALLATION

This section describes the unpacking and installation procedures for your new component.

Unpacking

All Cary Audio Design shipping containers have been specially designed to protect their contents and
special care has been taken to prevent damage under normal shipping conditions. Mishandling should be
evident upon inspection of the shipping container. If shipping damage is found after visual inspection,
take care not to destroy the evidence. If necessary, document the damage with photographs and contact
the transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your component
from damage should you wish to store it or ship it for after-sales service.

Warranty Card

IN THE USA: If you are the original purchaser of a new unit from an AUTHORIZED CARY AUDIO
DESIGN DEALER, please fill out the enclosed warranty registration card and return it to Cary Audio
Design within 15 days of your purchase. Cary Audio Design also suggests that you keep your original
packing cartons in case you ever need to ship the unit when moving to a new home. Warranty
restrictions apply. Consult the warranty section at the end of this manual for details. Please be certain to
keep a copy of the original sales receipt from your AUTHORIZED CARY AUDIO DESIGN DEALER to
validate the warranty if ever needed. The warranty is for the original purchaser only and does not
transfer to any subsequent owner.
OUTSIDE THE USA: Your local Authorized Cary Audio Design Distributor will make his own warranty
policy for your country. Please check with them for the terms of warranty for your new amplifier.

Break-In Period

The tubes and capacitors take approximately 100 hours of music playing to fully settle in for peak
performance. The PH 302 will seem sterile or thin sounding right out of the box. After the first couple of
hours you will notice increased depth and tighter bass. This break-in period defies all engineering theory,
but is true with most audio amplifiers.
WARNING
Make sure the PH 302 is unplugged from power pack before servicing.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ph-302 mkii

Table of Contents