Installation; Unpacking; Warranty Card; Break-In Period - Cary Audio Design PH-302 MkII Owner's Manual

Vacuum tube phono preamplifier
Hide thumbs Also See for PH-302 MkII:
Table of Contents

Advertisement

INSTALLATION

This section describes the unpacking and installation procedures for your new component.

Unpacking

All Cary Audio shipping containers have been specially designed to protect their contents and special care
has been taken to prevent damage under normal shipping conditions. Mishandling should be evident
upon inspection of the shipping container. If shipping damage is found after visual inspection, take care
not to destroy the evidence. If necessary, document the damage with photographs and contact the
transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your component
from damage should you wish to store it or ship it for after-sales service.

Warranty Card

IN THE USA: If you are the original purchaser of a new unit from an AUTHORIZED CARY AUDIO
DEALER, please fill out the enclosed warranty registration card and return it to Cary Audio within 15 days
of your purchase. Cary Audio also suggests that you keep your original packing cartons in case you ever
need to ship the unit when moving to a new home. Warranty restrictions apply. Consult the warranty
section at the end of this manual for details. Please be certain to keep a copy of the original sales receipt
from your AUTHORIZED CARY AUDIO DEALER to validate the warranty if ever needed. The warranty is
for the original purchaser only and does not transfer to any subsequent owner.
OUTSIDE THE USA: Your local Authorized Cary Audio Distributor will make his own warranty policy for
your country. Please check with them for the terms of warranty for your new amplifier.

Break-In Period

The tubes and capacitors take approximately 100 hours of music playing to fully settle in for peak
performance. The PH-302 MkII will seem sterile or thin sounding right out of the box. After the first
couple of hours you will notice increased depth and tighter bass. This break-in period defies all
engineering theory, but is true with most audio amplifiers.
WARNING
Make sure the PH-302 MkII is unplugged from power pack before servicing.
9

Advertisement

Table of Contents
loading

Table of Contents