Lenovo ThinkCentre M82 Hardware Maintenance Manual page 181

1. Install the solid state disk into the adapter. Then, install the four screws to secure the solid state disk to
the adapter.
Figure 117. Installing the solid state disk into the adapter
2. To install the solid state disk with the adapter into the 3.5-inch hard disk drive bracket, flex the bracket
and align pin 1 , pin
Figure 118. Installing the solid state disk with the adapter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid state disk.
4. Install the solid state disk into the hard disk drive bay. See "Replacing the hard disk drive" on page 176.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
.
Chapter 10 Replacing FRUs (machine types: 2756, 2800, 2929, 2932, 2934, 2941, 2945, 2961, 2982, 2988, 2993, 2996, 3181,
2 , pin 3 , and pin 4 on the bracket with the corresponding holes in the adapter.
3183, 3185, 3187, 3198, 3202, 3207, 3209, 3214, 3218, 3224, 3227, 3306, 3393, and 3395)
175