Lenovo ThinkCentre M82 Hardware Maintenance Manual page 126

2. Install the two screws to secure the mSATA solid state drive to the storage converter.
Figure 49. Installing the screws that secure the mSATA solid state drive
3. Slide the mSATA solid state drive storage converter into the card reader drive bay until it snaps into
position.
Figure 50. Installing the mSATA solid state drive
4. Connect the signal cable and the power cable to the mSATA solid state drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 150.
120
ThinkCentre Hardware Maintenance Manual