This unit provides a thumbnail screen for managing clips. A "clip" consists of a set of video, audio and
additional information such as meta data, and a "shot" is a clip generated by single normal start-to-stop
recording operation. A shot that spans multiple P2 cards is handled as a single clip.
The thumbnail screen displays a list of thumbnails of recorded clips. These thumbnails allow you to
browse and also perform the following clip management operations.
• Play back, copy, delete and repair clips
• Attach text memos to clips
• Browse and delete text memos
• Display and delete shot marks
◆ NOTE:
• Because thumbnails are generated from only a sample of the recorded video, they appear coarser
than the actual video.
Displaying the Thumbnail Screen
1
Hold the POWER button for one second to
turn the unit on.
◆ NOTE:
• To cause the thumbnail screen to appear at
power-on, select SETUP - BASIC - POWER
ON GUI, and then THUMBNAIL.
2
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD
monitor.
Press the THUMBNAIL button again to close
the thumbnail screen and return to the
record/playback screen (video).
34
Basic Operation: Thumbnail Screen Display
Thumbnail Screen Display
2
• Format P2 cards
• Show clip properties
• Show P2 card status
◆ NOTE:
• The SETUP - DISPLAY - OSD OUTPUT
menu setting allows selecting VIDEO OUT
or SDI OUT outputs.
Signals at the output jacks have some
limitations according to the selected format
and frequency.