Basic Operation; About P2 Cards; Inserting A P2 Card; Status - Panasonic AG-HPD24PJ Operating Instructions Manual

Basic Operation

Inserting a P2 Card

1
Hold the POWER button for one second to
turn the unit on.
2
Insert a P2 card into a P2 card slot until the
EJECT button pops out.
3
Fold the EJECT button toward the right.

About P2 Cards

Access Lamp
Lights green
1
Lights orange
Flashing
orange
Fast flashing
orange
Flashing green No available space on the P2
P2 Card Access Lamp and P2
Card Status
P2 Card P2 Card Status
Writing and reading are
enabled.
Writing and reading are
enabled for the current
recording (including LOOP
REC).
Writing or reading is in
progress.
Currently accessing P2 card
using USB device mode.
NOTE:
• Do not turn the unit off or
eject the P2 card when the
lamp is flashing orange,
such as while recording.
P2 card being recognized.
card. Only reading is
possible.
The P2 card contains the
maximum number of clips.
Only reading is possible.
The write-protect switch on
the P2 card is set to
PROTECT. Only reading is
possible.
Basic Operation: About P2 Cards
29