Customizing The Pcl, Postscript, And Pdf Transforms; Sample Configuration File; Infoprint Manager Transforms And Configuration Files - Ricoh InfoPrint Pro C900AFP Manual

Customizing the PCL, PostScript, and PDF transforms

Sample configuration file

|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
178
InfoPrint Manager for Windows: Procedures
Note: For information about the fonts used with the double-byte (db2afp)
transform, see Chapter 26, "Working with fonts," on page 255.
v "Working with the InfoPrint PPML transform program" on page 195
v "Working with the XML transforms" on page 197
v "Color management resource transform support" on page 204
You can customize the transforms for PCL, PostScript, and PDF data by specifying
values in the transform configuration files. Table 14 shows the default
configuration files that InfoPrint Manager provides.
In the table, install_path is the directory that InfoPrint Manager is installed in. If
you do not know the install path, you can find it in the Management Console.
Open the Management Console, click Edit -> Change Service Configuration and
find the Install path field.
You can either modify these files or create your own.
Table 14. InfoPrint Manager transforms and configuration files
Data Stream Transform
PCL pcl2afp
PostScript ps2afp
PDF pdf2afp
The PostScript and PDF transforms use the same default configuration files.
This is an example of a configuration file for the PostScript and PDF transforms.
The configuration file for the PCL transform is similar.
# ps2afp configuration file
# KEYWORD
###########
port = 8251
server = 127.0.0.1
ps_job_timeout = 20
ps_server_timeout = 20
ps_width = 8.5i
ps_length = 11i
ps_x_offset = 0i
ps_y_offset = 0i
ps_resolution = 600
ps_output_type = IO1_G4 # -a
ps_imgsmall = 0.5i
ps_linesmall = 0.5i
ps_txtsmall = 0.5i
Configuration File
install_path
\pcl2afp\
pcl2afp.cfg
install_path
\ps2afp\ps2afp.cfg
install_path
\ps2afp\ps2afp.cfg
ps2afp FLAG PURPOSE
############## ##################
# -P which TCP\IP port to use
# -S server to connect with
# -j maximum number of minutes
# to process PostScript job
# -s maximum number of minutes
# server waits between jobs
# -w width of generated image
# -l length of generated image
# -x left and right margins
# -y top and bottom margins
# -r resolution of printer
type of AFP image to
# generate
# default value for imgsmall
# default value for linesmall
# default value for txtsmall
Daemon
Configuration File
install_path
\pcl2afp\
pcl2afpd.cfg
install_path
\ps2afp\ps2afpd.cfg
install_path\
ps2afp\ps2afpd.cfg