Settings - Asko D5233 Use & Care Manual

Settings

Reprogramming
Some of the machine's functions can be reprogrammed. You get into the machine's change
program using the machine's ordinary buttons as per the instructions below. The selection
will be retained until the next time you reset this function.
Even if the machine is turned off at the main switch or loses power for any other reason, all
selections registered before the interruption of power will be retained.
Child-safe button lock
You can prevent a child starting the machine by accident or changing the settings by pro-
gramming the machine with a button lock, which requires the Temperature and Drying
buttons to be pressed simultaneously to start up the machine. The button lock will automati-
cally be reactivated after three minutes.
1. Switch off the dishwasher with the main switch.
+ 2. Hold in the Temperature and Drying buttons while pressing the main switch.
The Temperature, Drying and start symbols will flash. Release the Tem-
perature and Drying buttons.
PROG PROG
3. Press the Program button – when the Auto wash symbol is lit,
the button lock has been activated
START
4. Then press the Start/Stop button to store the setting.
STOP
or Reset:
1. Switch off the dishwasher with the main switc.
+ 2. Hold in the Temperature and Drying buttons at the same time as pressing
the main switch
PROG 3. Press the Program button – when the Auto wash symbol goes out,
PROG
the button lock has been deactivated
START
4. Then press the Start/Stop button to confirm the setting.
STOP
Customer Care Center
1-800-898-1879
www.askousa.com
21