Related Manuals for Zanussi ZDT8453
Summary of Contents for Zanussi ZDT8453
- Page 1 GESCHIRRSPÜLER DISHWASHER ZDT 8453 Bedienungsanleitung Seite 2 Instruction book page 21...
-
Page 2: Table Of Contents
Contents Safety instructions Disposal Economical and ecological dishwashing Installation instructions Building-in Levelling Fixing to adjacent units Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Description of the appliance The control panel Prior to using for the first time Setting the water softener Filling with salt Rinse aid... -
Page 3: Safety Instructions
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. -
Page 4: Installation Instructions
Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher may be fed with either hot (max. 60°) or cold electrician and/or plumber or competent person. water. -
Page 5: Water Outlet Hose Connection
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following Information concerning the electrical connection is given on the ways: rating plate on the edge of the dishwasher’s door. 1. To the sink outlet spigot, securing it to the underside of the Before plugging the appliance into the wall socket, make sure work surface. -
Page 6: Description Of The Appliance
Description of the appliance Upper basket stop Water hardness switch Salt container Detergent dispenser Control panel Rating plate Rinse aid dispenser Filters Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop IN153 The control panel Function Delay start push buttons option push button On/Off... -
Page 7: Audible Signals
Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: "Setting of the water softener" "End of programme" "Something not working with the machine" Deactivation/activation of the audible signals (The dishwasher must be switched off) 1. -
Page 8: Prior To Using For The First Time
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply The dishwasher is factory set at level 5. with the installation instructions. -
Page 9: Filling With Salt
Filling with salt Rinse aid Only use salt specifically designed for use in Rinse aid is automatically added during the last rinse, ensuring dishwashers. thorough rinsing, and spot and streak free drying. All other types of salt not specifically designed for use in The dispenser, which is positioned inside the door, holds about a dishwasher, especially table salt, will damage the water 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing... - Page 10 If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid must be placed in the detergent compartment. In this case the rinse aid inflow must be deactivated in order to avoid a double dosage. Deactivation/activation of the inflow of rinse aid (The dishwasher must be switched off)
-
Page 11: In Daily Use
In daily use Check if it’s necessary to refill with special salt or rinse aid Loading cutlery and dishes Load cutlery and dishes into the dishwasher. Sponges, household cloths and any object that can Fill with dishwasher detergent . absorb water may not be washed in the dishwasher. Select a wash programme suitable for the cutlery and Before loading the dishes, you should: dishes. -
Page 12: The Upper Basket
Forks and spoons should be placed in the removable cutlery Adjusting the height of the upper basket basket with the handles facing downwards and the knives with If washing very large plates you can load them in the lower their handles facing upwards. basket after moving the upper basket to the higher position. -
Page 13: Use Of Detergent
Use of detergent Only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Prior to the start of a wash programme (not for the "Rinse and Hold" programme). The detergent is released during the washing phase. -
Page 14: Different Kinds Of Detergent
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. -
Page 15: Washing Programmes
Washing programmes Degree of soil Programme Press the Cycle (3) Consumption values programme description Programme Energy Water type of load push button duration consumption consumption (in minutes) (in kWh) (in litres) Hot prewash Heavy soil. Main wash up to 70°C Intensive 70°C Crockery, cutlery, pots and 2 warm rinses... -
Page 16: Starting A Washing Programme
Starting a washing programme In this fully integrated appliance the controls are located on the After about 2 seconds the indicator lights of all the top of the door. When selecting a programme, the door needs programme push buttons will illuminate indicating that the to be open. -
Page 17: Maintenance And Cleaning
Maintenance and cleaning Clean the external surfaces of the machine and control panel Under no circumstances may the dishwasher be used with a damp soft cloth. If necessary use only neutral without filters. detergents. Never use abrasive products, scouring pads or Incorrect repositioning and fitting of the filters will solvent (acetone, trichloroethylene etc..). -
Page 18: What To Do, When
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The dishwasher will not start or stops during operation.The intervention of an alarm is indicated by a combination of flashing indicator lights and intermittent audible signals (see following chart). -
Page 19: Service And Spare Parts
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. -
Page 20: Hints For Test Centres
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"... - Page 21 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.