Use Of Rinse Aid; Loading Cutlery And Dishes - Zanussi ZDTS300 User Manual

Use of rinse aid

CAUTION!
Never fill the rinse aid dispenser with any other sub-
stances (e.g. dishwasher cleaning agent, liquid deter-
gent). This would damage the appliance.
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or lime
spots on the dishes after washing.

Loading cutlery and dishes

Sponges, household cloths and any object that
can absorb water may not be washed in the
Open the lid.
Open the lid.
Fill up with rinse aid. The
maximum level for filling is
indicated by "max"
IMPORTANT!
Top up the rinse aid when the light on the control panel
illuminates.
Reduce the dose if there are whitish streaks on the
dishes or a bluish film on glassware or knife blades.
Set the dosage level. (The
dose is factory set in po-
sition 4).
dishwasher.
Clean up any rinse aid
which overflows. Close
the lid and press until it
locks.
Close the lid and press un-
til it locks.
13