Table of Contents
Advertisement
2.9 – Installing the Processor(s) and Heatsinks
Your Thunder i7501 Pro supports the latest processor technologies from Intel. Check the following
page on TYAN's website for latest processor support:
The following diagrams will detail how to install your processor(s):
The CPU Voltage Mismatch (LED) – Refer to D11 on page 8 and page 11.
Will light up red if there is a mismatch in CPU voltage. Only identical CPUs can
REMINDER
be used.
When installing only 1 processor, ensure to install it in CPU socket 1.
The processors you choose to use may not look exactly like the one pictured above, nor will the
socket look exactly the same. For example, your processor may appear to be in a different color
and have different markings on it. The diagram is provided as a visual guide to help you install
socket processors.
1.
Lift the lever on the socket until it is approximately 130
to the socket.
2.
Align the processor with the socket. There are keys underneath the processor just like
on memory modules to ensure that they insert the correct way.
3.
Seat the processor firmly into the socket by gently pressing down until the processor
sits flush with the socket.
4.
Place the socket lever back down until it snaps into place.
5.
Your processor is installed.
6.
Repeat these steps for the second processor if you are using two processors.
Take care when installing Xeon processors as they have very fragile connector pins below
the processor and can bend and break if inserted improperly.
Heatsink Installation
After you are done installing the processor(s), you should proceed to installing their heatsinks.
Heatsinks will ensure that the processors do not overheat and continue to operate at maximum
performance for as long as you own them. Overheated processors may damage the motherboard.
Because there are many different types of heatsinks available from many different manufacturers,
a lot of them have their own method of installation, and information on choosing the appropriate
heatsink. The i7501 Pro does support the Intel PWT (Processor Wind Tunnel) heatsinks. Please
refer to Intel's website
specific information on installation of the PWT old and new versions. The next page contains
installation
instructions
http://www.intel.com/support/processors/xeon/intnotes.htm#Identifying
for
the
CPU
retention
http://www.TYAN.com
http://www.Tyan.com
o
or as far back as possible
brackets
included
17
for
with
your
i7501.
- Quick Links:
- Hardware Specifications
Hide quick links:
Advertisement
Table of Contents
