Signature Edition Specifications - Sunfire Series II User Manual

User's Manual

Signature Edition Specifications

Power output
625 watts continuous, per channel,
both channels driven into eight ohms,
from 20Hz-20kHz with no more than
0.5% T.H.D.
Power at clipping, minimum:
1250 watts per channel into four ohms.
2000 watts per channel into two ohms
(time limited basis).
Hum and Noise
-103 dB, A-Weighted
Maximum output current
100 amperes peak to peak per channel
Maximum output voltage
70.7 Vrms
Output impedance
Voltage source: Approximately zero ohms
Current source: Approximately one ohm
Input impedance, RCA inputs
30kΩ
Input sensitivity for rated output
Unbalanced: 2.5 Vrms
Balanced:
Input impedance, XLR inputs
24kΩ, each leg balanced to ground
Female XLR
Pin 1 is ground
Pin 2 is negative (cold)
Pin 3 is positive (hot)
Signature Edition Specifications
8
2.5 Vrms
Power Consumption
45W At idle
300W Typical (1/8th power)
1800W Absolute Max (Fuse Limit)
Dimensions
19.0 inches wide
6.5 inches high (including feet)
15.75 inches deep
Weight
39 lbs
Finish
Brushed aluminum and black anodize