Biwiring, Mono - Sunfire Series II User Manual

User's Manual
Mono Biwire connections
If you have two Sunfire amplifiers and
your speakers can be biwired, you can create
a very powerful and efficient system as
follows:
• Connect one amplifier's right voltage
source output to the right speaker's
woofer input terminals.
• Connect the same amplifier's left
current source output to the right
speaker's upper range input terminals.
• Connect your preamplifier's right
output to the amplifier's right Normal
input jack.
+ -
R IG H T
W O O F E R
( V O L T A G E
S O U R C E )
R IG H T L O U
System Configurations
18
+ -
R IG H T
T W E E T E R
( C U R R E N T
S O U R C E )
D S P E A K E R
• Connect the right Lab Direct input to
the left Lab Direct input with a short
patch cord.
• Alternatively, you can use a "Y" cable
to split the preamp output into two, one
to feed the left Normal input and one
to feed the right Normal input.
• The left speaker connects to your
second amplifier in exactly the same
way as shown. The left preamp output
connects to the right Normal input jack
of the second amplifier.
T O
S E C O N D
A M P L IF IE R