Troubleshooting; Video And Audio; Remote Control; General - Dynex DX-26LD150A11 User Manual

42
DX-26LD150A11/DX-32LD150A11

Troubleshooting

Warning: Do not try to repair your TV/DVD combo yourself. Contact
authorized service personnel.

Video and audio

Problem Solution
No picture or sound • Make sure that the power cord is plugged
(the screen is not lit) into a power outlet.
• Press
the remote control.
• Try another channel. The problem could be
with the TV station.
Dark, poor, or no • Select the correct video status. For more
picture (the screen is information, see "Adjusting the picture" on
lit), but sound is page 17.
good • Adjust the brightness. For more
information, see "Adjusting the picture" on
page 17.
• Make sure that the antenna or cable TV is
connected correctly. For more information,
see "Connecting an antenna, cable TV, or
satellite TV box" on page 11.
No color, picture is • Adjust the color saturation. For more
dark, or color is not information, see "Adjusting the picture" on
correct page 17.
Only noise (snow) • Make sure that the antenna or cable TV is
appears on the connected correctly. For more information,
screen see "Connecting an antenna, cable TV, or
satellite TV box" on page 11.
• Try another channel. The problem could be
with the TV station.
Picture has dotted • Adjust the antenna.
lines or stripes • Move your TV/DVD combo away from noise
sources, such as cars, neon signs, or hair
dryers.
Picture has double • Use a highly directional outdoor antenna or
images change to cable or satellite TV.
Picture has a few • A few bright or dark dots on an LCD screen
bright or dark dots is normal. It does not affect the operation of
this TV/DVD combo.
Good picture, no • Increase the volume.
sound • Press MUTE to make sure that the sound is
not muted.
• Make sure that the audio mode is set to
Stereo or Mono. For more information, see
"Adjusting the sound" on page 18.
Audio noise or static • Move radio frequency communication
equipment, such as a cordless phone, away
from your TV/DVD combo.
(power) on your TV/DVD combo or

Remote control

Problem Solution
Remote control • Replace the batteries. For more
does not work information, see "Installing remote control
batteries" on page 9.
• Make sure that the batteries are inserted
correctly. For more information, see
"Installing remote control batteries" on
page 9.
• Make sure that the power cord is plugged
into an AC power outlet.
Trouble • See instructions and a table of common
programming your codes in "Programming a universal remote
existing universal control" on page 10.
remote control. • Codes are subject to change. For up to date
codes, go to www.dynexproducts.com.
• Replace the batteries. For more
information, see "Installing remote control
batteries" on page 9.
• Refer to the User Guide that accompanied
your universal remote control and contact
the manufacturer if problems persist.

General

Problem Solution
Cannot tune to • The program you want to watch may be
one or more blocked through the parental controls. For
channels more information, see "Setting parental
control levels" on page 25.
• The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. For more
information, see "Changing channel settings"
on page 19.
Cannot access • If a setting or option is grayed out, it is not
some items available in the current input mode.
Password is lost • On the Parental Controls menu, enter 9999 for
the password, then set a new password. For
more information, see "Setting parental
controls" on page 23.
TV/DVD combo • When you are using your TV/DVD combo, the
cabinet creaks temperature inside the cabinet increases. This
causes the cabinet to expand or contract,
which produces the creaking noise. This is not
a malfunction.
Buttons do not • Unplug the power cord for a few seconds,
work then plug it back in and turn on your TV/DVD
combo.
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV/DVD combo, then turn it on again.
Troubleshooting