Advertisement
• press
to fix the new length and print the label.
PRINT
• To cancel the fixed length and restore the automatic
LENGTH
length, press
+
(l<->l will go off) to cancel the fixed length, then
press
to return to the current label.
DEL
PERSONALISED (USER) LABEL SETTINGS
This function enables you to store your favourite label
settings in the memory and to recall them by pressing
just a few keys.
To store personalised label settings:
• Make your personal settings, e.g.
Small height, extended width text –
Underlined text – A
Italic text – A
• Press
; the display will stop showing the current
USER
label text and will show your personalised settings.
• Press
to store the settings in the memory (any
settings previously stored will be replaced by these
settings) and return to the current label, or
• Press
to exit and return to the current label (any
DEL
settings previously stored will be unaffected).
To recall personalised settings:
RECALL
• Press
+
(confirmed by the USER indicator
USER
in the display). The display will stop showing the
current label text and the settings in the user
memory will be recalled and displayed.
• Press
to exit (the user settings will remain
DEL
stored in memory) and return to the current label, or
• Press
to copy these settings into the label. Any
previous settings made on the current label will be
lost and replaced by the user settings.
Symbols and special characters
INTERNATIONAL CHARACTERS
To add a diacritical (accent) to create an international
character, enter the character first, followed
immediately by the diacritical, e.g. press
by
to get é.
To add a diacritical to an existing character, use
to place the cursor under the character to be
changed, then press the appropriate diacritical key.
SYMBOLS
SYMBOL
Press
+
to show symbols and special
JUST
characters, some of which are not available direct from
the keyboard. The display will show: A-U? or, if any
symbols have been stored in the memory: A-U / 1-9 ?
(see also 'PERSONALISED (USER) SYMBOLS').
Each letter selects a line of symbol characters, as
shown in the table on page 2.
Press
to cancel, or press a letter key 'A' to 'U' until
DEL
you find the line of symbols required.
Use
or
to select a symbol. Press
symbol in the label, or press
the label.
followed by
+
SIZE
followed
E
to place the
to place it and print
PRINT
PERSONALISED (USER) SYMBOLS
You can store up to nine frequently used symbol
CLEAR
characters in the memory and recall a personalised
DEL
symbol by pressing just three keys.
To store a personalised symbol:
• Press
if any symbols have already been stored in the
memory: A-U / 1-9 ?
• Press letter key 'A' to 'U' as required.
• Use
• Press
selected symbol and >1-9? (eg
• Press a number between 1 and 9. The selected
symbol will be stored in the user symbol memory
with that number and will replace any symbol
previously stored under that number.
To recall a personalised symbol:
• Press
• Press number key 1-9 as required. The display will
show the stored symbol.
Note: If you press a number which does not have a
stored symbol, the display will flash once.
Press another number key if necessary until the
symbol required is displayed.
• Press
• Press
PRINT CONTRAST — may be adjusted by pressing
SYMBOL
+
JUST
the contrast symbols <- l l l l l +>.
Use
to confirm the setting. The normal contrast level is the
mid-setting.
Note: This function enables you to adjust the print
quality under extreme temperature conditions.
BARCODES
Barcodes can be printed on 19mm wide labels only and
can be either full height or mixed with text on one or
two lines.
or
To create a bar code:
• Press
previously selected.
• Press
label, or
• Use
available: EAN 8, EAN13, UPC A, UPC E, CODE 39
and CODE 128.
• Press
barcode symbol
page 3.
• Enter the characters which will become the barcode,
eg: 1234567.
• Press
5
SYMBOL
+
. The display will show: A-U? or,
JUST
or
to select a symbol (eg
.The display will change to show the
USER
SYMBOL
+
; the display will show: A-U/ 1-9 ?.
JUST
to place the symbol in the label, or
to cancel and return to the current label.
DEL
followed by space key
or
to select lighter or darker print. Press
BARCODE
+
VERT
BARCODE
+
to display the barcode type
VERT
to cancel and return to the current
DEL
or
to step through the barcode types
to select the barcode type displayed. The
will appear in the display – see
1234
to return to the label.
).
>1-9?).
to display
Hide quick links:
Advertisement
