Setting Audio Input; Automatic Volume Adjustment; Outputting Audio Only; Aquos Link Settings - Sharp Aquos LC-32LE600E Operation Manual

Basic adjustment
Audio
Audio Description
Available only when you set "Audio Description" in the
"Type" menu above.
When set to "On", audio for the visually
Speaker
impaired is output from the TV speakers.
When set to "On", audio for the visually
Headphone impaired is output from the headphone
terminal.
Adjust the volume of the speakers or
Volume
headphones.

Setting audio input

Option
PC Audio Select
When using the EXT 4 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI
HDMI 2
2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack*.
When connecting a PC to the EXT 4
EXT 4 (RGB) terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
* HDMI signals have priority when the signal includes audio.
NOTE
• You must set this to "EXT 4 (RGB)" when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If "HDMI 2" is set, there will be no sound output.

Automatic volume adjustment

Option
Auto Volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control (Auto
Volume) reduces this problem by equalizing levels.
Item
Item

Outputting audio only

Option
Audio Only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Both screen images and audio are
Off
output.
On Audio is output without a screen image.

AQUOS LINK Settings

Option
AQUOS LINK Control
Set to "On" to enable interactive operation of compatible
HDMI devices (DVD player/recorders, Blu-ray player/
recorders).
What you can do with AQUOS
LINK
One Touch Play
When the TV is in standby mode, it will automatically turn on
and play back the image from the HDMI source.
Controlling AQUOS LINK devices
using remote control unit
AQUOS LINK allows you to operate the HDMI-connected
device with a single remote control unit.
Buttons for AQUOS LINK operation
Buttons
PLAY I
Starts playback.
FWD J
Scans forward.
REV G
Scans backward.
STOP H
Stops playback.
Records the programme being watched via
REC E
the recorder's tuner.
REC STOP H
Stops recording.
B
Turns the HDMI-connected device on/off.
NOTE
• Open the remote control unit's flip cover when using the
butttons above.
Item
Description
19