Audio Connections; Speaker/Amplifier Connection; Inserting The Ca Card Into The Ci Module - Sharp Aquos LC-32LE600E Operation Manual

Connecting external devices

Audio connections

Speaker/amplifier connection

Connect an amplifier with external speakers as shown below.
E
Connecting an amplifier with digital
audio input
DIGITAL AUDIO IN

Optical audio cable
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio
output format compatible with the programme you are watching or the device connected.
Go to "MENU" > "Option" > "Digital Audio Output" > select "PCM" or "Dolby Digital".
NOTE
• When set to "Dolby Digital", Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When
set to "PCM", PCM is output no matter what audio formats are received.

Inserting the CA Card into the CI Module

1 Carefully insert the CI Module in
the CI slot with the contact side
forward.
2 The logo on the CI Module must
be facing outward from the rear
of the TV.
E
Connecting an amplifier with
analogue audio input

Audio cable
Checking CI Module information
Go to "MENU" > "Digital Setup" > "CI Menu".
• The content of this menu depends on the provider of the CI Module.
Module
General information on CI Module displays.
Menu
Adjustment parameters of each CA Card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
• Make sure that the CI Module is properly inserted.
R L
AUX1 IN
R L
AUX OUT
15