Optional Equipment - Duerkopp Adler 271 Operating Instructions Manual

Noise Level Lc:

1.3 Optional Equipment

App. 301
Z 120 1801
Z 120 1851
Z 133 371
Z 116 6741
Z 124 401
Z 145 1
Z 145-101
722 2041
999 260029
999 260030
999 260031
933 5736
273 1041 u. 274 1141
570 1833
271 661
271 1671
Work station specific emmission value to DIN
45635-48-A-1-KL2 by stitch length 3.2mm
271-140041 and 140042 with stitches 4800/min. = 80
dB(A)
272-140041 and 140042 with stitches 4800/min. =
82dB(A)
272-140041 and 140042 with stitches 4500/min. =
80dB(A)
Covering hood for the machine head
Electro-magnetic thread wiper for 271 and 272
sub-classes -140000 and -160000
Electro-magnetic thread wiper for 273 and 274
Reflected light barrier for automatic sewing stop at
the material end with follow-up functions. For motors
with external control panel V730 or DB5.
Electro-pneumatic device for alternating sewing with
two differently set stitch lengths and two differently
set needle thread tensions. Normal seam and seam
with thread drawing (basting stitches). Partial
strengthened tension (Seam thickening) and
ornamental seams.
Electro-pneumatic operation for on/off switching of
the edge cutters via key for 272-640142.
Graduated edge cutting (finger version for lightest
materials). In conjunction with the sewing unit 272/E
111 for widths of cut of 4.5 and 7mm.
Graduated edge cutting (2 knife version for medium
heavy material). In conjunction with sewing unit
272/E 112 for widths of cut of 3.5 and 6,5mm.
Container for cutting waste for connection to the
in-house vacuum system. If this is not available then
the appropriate centrifugal blower is to be used.
for 3-phase current 380-400V+N, 50Hz
for 3-phase current 220-230V, 60Hz
for 3-phase current 415-440V, 50Hz
Toothed steel roller, 9mm wide for 273 and 274 roller
transport
Height setting for the pressure foot with hard to
transport material, e.g. velvet.
Filter regulator for the compressed air connection
Parts set, knee lever for pressure foot lift by
machines with automatic bartacker.
Parts set, hand lever for seam bartacking for
machines with automatic bartacker.
7