Lubrication - Duerkopp Adler 271 Operating Instructions Manual

4.2 Lubrication

Oil SP-NK 10
20
For the lubrication of this machine it is essential that
Esso SP-NK 10 or an absolutely equivalent quality
lubricating oil be used.
The maintenance of the parts to be provided with oil is
limited to the following:
– The oil level in the oil reservoir 1 may not drop below
the "MIN" mark. (40 hours)
With the machine upright fill oil to the "MAX" mark.
With the exception of the hook lubrication all bearing
positions on the machine are supplied via a central
oil wick lubrication from the oil reservoir 1.
– The oil level in the oil reservoir 2 for the hook
lubrication should also not be allowed to drop below
the "MIN" mark. (40 hours)
With the machine head tilted back fill oil to the "MAX"
mark.
– When necessary fill the oil reservoir 9 of the
maintenance unit to the groove marking with oil. (40
hours)
For this completely shut off the compressed air by
turning the knob 4 to the left and then screwing out
screw 10.
Oil SP-NK 10
1
2