General Information; Safety Notes; Machine Operation Without Material; Tables - Duerkopp Adler 271 Installation Instructions Manual

1. General Information

1.1 Safety Notes

1.2 Machine Operation without Material

1.3 Tables

2. Assembling the Frame

2
For Special Attention!
The mains voltage and the operating voltage shown on
the motor rating plate must be in agreement.
All work on electrical components is only to be conducted
by authorized personnel and with the mains plug
disconnected.
The safety instructions are to be observed.
Installation is to proceed according to the following
instructions.
–
The electrical connections are to be found in the
circuit diagram.
–
The sub-class specific arrangement of inputs and
outputs, as well as the appropriate parameter no.s
are listed on the data sheet.
–
All required parts are included in the accessories
package.
In this case the pressure feet must first be locked in the
raised position.
The cutouts in tables made in-house must have the
dimensions shown in the sketches.
The tables must also have the necessary load capacity
and stability.
Assemble the frame parts as shown in the illustration.
Slide on the enclosed frame feet 1.
A stable positioning of the frame can be achieved after
loosening the screws 2.
The desired work height and a horizontal working plane
can be set after loosening screws 3.
2
1
3