Table of Contents
Advertisement
7.
Pneumatic connection
The pneumatic optional extras require a supply of moisture-free compressed air.
–
Connect the special sewing machine to the local compressed-air supply with
connection hose 1 (Ø = 9 mm).
–
Pneumatic connection kit
A pneumatic connection kit is available for frames with a compressed-air
maintenance unit and pneumatic optional extras under order no. 0797 003031.
It contains the following components:
7.1
Compressed-air maintenance unit
The WE-6 compressed-air maintenance unit for pneumatic optional extras is available
under order no. 9781 000002.
Connecting the compressed-air maintenance unit
–
Attach the compressed-air maintenance unit 4 with bracket 3 and plate 2 to the
frame.
–
Connect the compressed-air maintenance unit 4 with connection hose 1 (Ø = 9
mm) and R1/4" hose connector to the local compressed-air supply.
Adjusting the operating pressure
The operating pressure is 6 bar.
It can be read off at the pressure gauge 6.
–
To adjust the operating pressure, lift and turn rotary handle 5.
to increase pressure:
to decrease pressure:
CAUTION:
The pneumatic assemblies will only function properly at a
mains pressure of 8 to 10 bar.
The operating pressure of the special sewing machine is
6 bar.
- connection hose, 5m long, Ø = 9 mm
- hose connectors and ties
- connector plug and socket
turn rotary handle 5 clockwise
turn rotary handle 5 anticlockwise
29
Hide quick links:
Advertisement
Table of Contents
