DPA250 OPERATION
Specifications
CEA-2006 Power Standard Specifications
(reference: 14.4VDC, 20Hz~20kHz)
Power
Output
(14.4VDC, 20Hz ~ 20kHz):
35 Watts RMS x 2 channels @ 4 ohms and ≤ 1% THD+N
50 Watts RMS x 2 channels @ 2 ohms and ≤ 1% THD+N
100 Watts RMS x 1 channel @ 4 ohms (bridged) and ≤ 1% THD+N
Total dynamic power: 250 Watts @ 4 ohms
Signal to noise ratio: 75dBA (reference: 1 watt into 4 ohms)
Frequency response: 20Hz ~ 20kHz (+/-3dB)
Amplifier dimensions: 8.27"(L) x 7.09"(W) x 1.97"(D)
Typical installation dimensions: 10"(L) x 10"(W) x 3"(D)
Design and specifications subject to change without notice.
9