Table of Contents
Advertisement
Main Power Connections
Connect +12V, GND and REM wires accordingly. A suitable fuse MUST be installed on the
+12V lead within 18" of the battery for protection of the vehicle's electrical system.
Fuse Rating
When replacing the fuse, make sure new
fuse is the correct type and amperage. Using
an incorrect fuse could damage the amplifier.
DPA250 15 amp ATO x 1
DPA250 INSTALLATION
Typical Wire Routing
Power/Ground Wire Size
For optimum performance, use only the wire
size listed below or larger. Make sure to use
the same size power and ground wire.
DPA250
10 awg
5
Advertisement
Table of Contents
