Cd Player Operation - Dual XDMA6540 Installation & Owner's Manual

XDMA6540 OPERATION
Insert CD
Track Select
Fast Forward/Reverse
CD-R/CD-RW
Compatibility
18
CD Player Operation
With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
Eject CD Press EJECT to eject the CD. The unit will change to
previous mode of operation. If the disc is not removed
within 10 seconds, the unit will reload the disc. The unit
does not have to be turned on to eject CD.
Press TRACK
Press TRACK
track. Pressing TRACK
the previous track.
Press and hold TRACK
or reverse a track.
Pause
Press
Press
Intro Press INT to enter the Intro menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the INT function.
• ALL SONGS - Plays the first 10 seconds of each track.
Repeat
Press RPT to enter the Repeat menu, then turn the volume
knob to select one of the following options:
• ALL SONGS - Plays all tracks on CD.
• CURRENT SONG - Continuously repeats selected track.
Random Press RDM to enter the Random menu, then turn the
volume knob to select one of the following options:
• OFF - Cancels the RDM function.
• ALL SONGS - Plays all tracks in random order.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method. In
addition, the following CDs may be incompatible with this
unit:
CDs exposed to extreme temperatures or direct sunlight
for extended periods of time, CDs recorded in which a
recording session failed or a re-recording was attempted
and, or encrypted or copy-protected CDs which do not
conform to the audio CD-DA red book recording standard.
ll
to skip to the beginning of the next track.
nn
to return to the beginning of the current
nn
ll
/ II to temporarily stop CD playback.
l
/ II again to resume playback.
l
again skips to the beginning of
nn
or TRACK to fast forward