Cd Player Operation - Dual XDC100BT Installation & Owner's Manual

XDM290BT
Insert CD
Eject CD
Track Select
Fast Forward/Reverse
Random
CD-R/CD-RW
Compatibility
8
OPERATION

CD Player Operation

With the label facing up, insert a standard size CD into
the CD slot. The CD will automatically begin playback.
Press EJECT to eject the CD. The unit will change to
previous mode of operation. If the disc is not removed
within 10 seconds, the unit will reload the disc. The unit
does not have to be turned on to eject CD.
Press TRACK
track. Press TRACK
the current track. Pressing TRACK
the beginning of the previous track.
Press and hold TRACK
forward or reverse a track.
Pause
Press
Press
Intro
Press INT to enter the Intro menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the INT function.
• ALL - Plays the first 10 seconds of each track.
• FOLDER - Plays first 10 seconds of each track in folder.
Repeat
Press RPT to enter the Repeat menu, then turn the
volume knob to select one of the following options:
• ALL - Plays all tracks on CD.
• TRACK - Continuously repeats selected track.
• FOLDER - Continuously repeats all files in selected
folder
Press RDM to enter the Random menu, then turn the
volume knob to select one of the following options:
• OFF - Cancels the RDM function.
• ALL- Plays all tracks in random order.
FOLDER - Plays all tracks in folder in random order.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method.
In addition, the following CDs may be incompatible with
this unit: CDs exposed to extreme temperatures or direct
sunlight for extended periods of time, CDs recorded in
which a recording session failed or a re-recording was
attempted and, or encrypted or copy-protected CDs
which do not conform to the audio CD-DA red book
recording standard.
ll
to skip to the beginning of the next
nn
ll
l
/ II to temporarily stop CD playback.
l
/ II again to resume playback.
to return to the beginning of
nn
again skips to
nn
or TRACK to fast