Dual AXXERA XDMA7800 Installation & Owner's Manual page 19

Connecting an iPod/iPhone Device
USB Connection
When the control of iPod/iPhone feature is set to "FULL" in the iPod Menu, use the
following functions to control the device:
Song Select
Fast Forward and
XDMA7800
Using the "dock connector to USB" sync cable (provided with
the iPod/iPhone device), plug the USB cable into one of the
XDMA7800's two USB ports. Once connected, playback will
begin automatically.
You may connect the iPod/iPhone device to the front USB
port, rear USB port, or to both ports. A USB extension cable
is included for better rear USB port access.
Controlling a Device: Full Control
Press
Press
Pressing
song.
Press and hold
Reverse
song.
Pause
Press
Press
Repeat Press RPT to enter the Repeat menu, then turn the volume
knob to select one of the following options:
• ALL SONGS - Repeats all tracks.
• CURRENT SONG - Repeats selected track.
Random
Press RDM to enter the Random menu, then turn the
volume knob to select one of the following options:
• OFF - Cancels the RDM function.
• ALL SONGS - Plays all tracks in random order.
• CURRENT ALBUM - Plays all tracks in the selected album
in random order.
Intro
Press INT to enter the Intro menu, then turn the volume
knob to select one of the following options:
• OFF - Cancels the INT function.
• ON - Plays first 10 seconds of each track.
Operation of iPod/iPhone
ll
to skip to the beginning of the next song.
nn
to return to the beginning of the current song.
nn
again skips to the beginning of the previous
ll
or
l
/ II to temporarily stop playback.
l
/ II again to resume playback.
19
nn
to fast forward or reverse a