Cd Player Operation - Dual X2DMA400 Installation & Owner's Manual

Insert CD
Eject CD
Track Select
Fast Forward/Reverse
Pause
Repeat
Random
CD-R/CD-RW
Compatibility
CD Player Operation
With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
Press EJECT to eject the CD. The unit will change to
previous mode of operation. If the disc is not removed
within 10 seconds, the unit will reload the disc. The unit
does not have to be turned on to eject CD.
Rotate tuning knob right to skip to the beginning of the next
track. Rotate tuning knob left to return to the beginning of
the current track. Rotate tuning knob left again to skip to the
beginning of the previous track.
Press and hold TRACK
or reverse a track.
l
/ II to temporarily stop CD playback.
Press
l
/ II again to resume playback.
Press
Press INT to enter the Intro menu, then turn the tuning knob
Intro
to select one of the following options:
• OFF - Cancels the INT function.
• ALL - Plays the first 10 seconds of each track.
Press RPT to enter the Repeat menu, then turn the tuning
knob to select one of the following options:
• ALL - Plays all tracks on CD.
• ONE - Continuously repeats selected track.
Press RDM to enter the Random menu, then turn the tuning
knob to select one of the following options:
• OFF - Cancels the RDM function.
• ALL - Plays all tracks in random order.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method. In
addition, the following CDs may be incompatible with this
unit:
CDs exposed to extreme temperatures or direct sunlight
for extended periods of time, CDs recorded in which a
recording session failed or a re-recording was attempted
and, or encrypted or copy-protected CDs which do not
conform to the audio CD-DA red book recording standard.
X2DMA400 OPERATION
ll
or TRACK
nn
to fast forward
11