Dual X2DMA400 Installation & Owner's Manual page 22

X2DMA400 OPERATION
SiriusXM Vehicle Tuner Operation
Listening to SiriusXM
Satellite Radio
Changing Channels
Setting Channel Presets
Recalling Channel
Channel Search List
Category Search
22
Radio ID To view the Radio ID on the LCD, turn the tuning knob left or
right until channel 0 appears. The 8 character Radio ID will
appear on the display. The Radio ID is also printed on the
underside of the SiriusXM Vehicle Tuner.
Note: The Radio ID does not use the letters I, O, S, F.
After installation of the SiriusXM Vehicle Tuner, press
SOURCE until SiriusXM mode appears to begin listening to
SiriusXM Satellite Radio.
Turn the tuning knob left/right to change SiriusXM channels.
Band Press BAND to select between the SXM1, SXM2 and SXM3
bands. Up to six presets can be programmed for each band,
for a total of 18 SiriusXM Satellite Radio channel presets.
To store a channel, choose the desired Band (SXM1-SXM3),
then tune to the desired channel. Press and hold the desired
preset button (1-6) on the front panel or remote control for
more than two seconds. When stored, a beep sound will be
heard and the preset number will appear in the display.
The preset channel can be recalled by pressing the
Presets corresponding preset button.
Note: Buttons 7,8,9,0 on the remote control are not
associated with channel presets.
Browse through a list of all available channels.
• Press SELECT to begin browsing the channel list.
• Turn the tuning knob to cycle through the list of channels.
• Press SELECT to begin listening to the highlighted
channel.
Note: Press DISP to change between the channel name,
artist name, song title or content info.
Browse through a list of categories, and choose a channel in
the desired category.
• To begin, press TRACK
through a list of categories. Category search can also
be performed by pressing CAT UP or CAT DOWN on the
remote control.
• Once the desired category is displayed, turn the tuning
knob to browse all the channels in the selected category.
• Press SELECT to begin listening to the currently displayed
channel.
ll nn
or TRACK to cycle