Dodge Ram 3500 Owner's Manual page 240

240 UNDERSTANDING YOUR INSTRUMENT PANEL
2. To increase the clock by hours, make sure "HR +" is
highlighted and press ENTER. Press ENTER again to
increase the clock by another hour. You will see on the
"User Defined Time" display the number of hours you
have increased the clock by.
3. To decrease the clock by one hour, use the Select
Encoder to highlight the "-" sign. Press ENTER. Press
ENTER again to decrease the clock by another hour.
4. To increase the clock by minutes, make sure "MIN +"
is highlighted and press ENTER. Press ENTER again to
increase the clock by another minute.
5. To decrease the clock by minutes, use the Select
Encoder to highlight the "-" sign. Press ENTER. Press
ENTER again to decrease the clock by another minute.
6. Select "DONE" to exit from the clock setting mode.
Press ENTER to save your changes. If you press CAN-
CEL or NAV then your changes will not be saved.