TYAN S7010 User Manual page 62

3.2.9.2.1 Setup LAN Configuration
Main Advanced
Setup LAN Configuration
IP Address Configuration
IP Address
Subnet Mask
Gateway Address
Save LAN Configuration
NOTE: They can not be modified in DHCP mode. (IP Address, Subnet Mask,
Gateway Address)
IP Address Source
Select IPMI IP Address Source.
STATIC / DHCP
NOTE:
IP Address, Subnet Mask and Gateway Address appear when IP
Address Source is set to [STATIC].
IP Address / Subnet Mask /Gateway Address
Enter Static IP Address / Subnet Mask.
Save LAN Configuration
After setup LAN Configuration, select Save LAN Configuration and click [OK] to
enable changes.
BIOS Setup Utility
PCI/PnP Boot
[DHCP]
[000.000.000.000]
[000.000.000.000]
[000.000.000.000]
62
http://www.tyan.com
Security Chipset
IPMI IP Address Source
STATIC / DHCP
After setup LAN Configure
need select Save LAN
Configuration and choice
[Ok] to enabled changes.
Select Screen
←
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Exit