Schwinn IC Pro Assembly Manual page 8

Step 3
Ref. # Description
1 Frame
43 Pedals with Toe Clips & Straps (Left & Right)
Tools Required
Stamped Steel Combination Wrench
A. Remove Pedals (43) from the small parts box and look at the
ends of the pedal threads. You will notice that each pedal is
market with an "R" or an "L" on the very end of the spindle
past the threads. This mark indicates which side of the bike
the pedal is intended to mount. This is important since the
thread directions are different for each pedal.
B. Locate the Pedal that has the "R" on the spindle. This pedal is
for the right side crank arm of the bike (chain guard side) and
is right hand threaded (turn clockwise to tighten). It is a good
idea to apply grease to the threads before attaching them to
the crank, this will assure that they can be removed in the
future. Using the supplied Combination Wrench thread the
right Pedal on to the crank arm, tighten firmly.
C. Locate the Pedal that has the "L" on the spindle. Follow the
directions in step B. however, you will need to turn the spindle
left (counterclockwise) to tighten as the "L" spindle is reverse
threaded.
Assembly
Qty
1
1 Pair
1
43
8
Assembly Manual
43