Playback Procedure - Sansui HDLCDVD320 Owner's Manual

32” tft lcd digital tv with dvd player
Hide thumbs Also See for HDLCDVD320:
Table of Contents

Advertisement

NOTES:
• If a non-compatible disc is loaded,
"Incorrect Disc", "Region Code Error"
or "Parental Error" will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 9 and 57).
• Some discs may take a minute or so
to start playback.
• If an 8 cm disc is placed into the disc slot
and picture playback or menu display
does not begin automatically, press
PLAY.
• A "Prohibition" symbol " " may appear
at the upper left of the screen. This
symbol means either the feature you
tried is not available on the disc, or the
unit cannot access the feature at this
time. This does not indicate a problem
with the unit.
• If you place a single-faced disc label
backwards (i.e. the wrong way) "Reading"
will appear in the display and then
"Incorrect Disc" will be displayed.
• Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this unit plays DVDs according
to the disc content recorded, some
playback features may not be
available. Also refer to the instructions
supplied with the DVDs.

Playback procedure

1
Press TV/DVD to select DVD mode.
2
Place the disc in the disc
slot with the label side
facing forward. (If the disc
has a label.) Hold the disc
without touching either of
its surfaces, align it with the
guides, and place it in position.
3
On the screen, "5 5 5 5 5 "
changes to "Reading" and
then playback will
commence.
• A menu screen may
appear on the TV screen,
if the disc has a menu
feature. In this case,
press
,
,
ENTER to operate a
menu feature.
4
Press STOP to end playback.
• The unit memorizes the stopped point, depending on
the disc. "
" appears on the screen. Press PLAY to
resume playback (from the scene point).
• If you press STOP again ("
or unload the disc, the unit will clear the stopped point.
5
Press 5 5 5 5 5 (EJECT).
Remove the disc and then press POWER.
The unit turns off.
When you eject the disc, you may hear mechanism noise,
but it is not malfunction.
,
or
Reading
" appears on the screen)
41

Advertisement

Table of Contents
loading

Table of Contents