Adding Liveliness To The Sound (Sound Control) - Roland FP-4 Owner's Manual

Performing

Adding Liveliness to the Sound (Sound Control)

You can add liveliness to the sound to give it superb clarity and distinctness.
fig.Panel-SoundControl.eps
1. Press the [Sound Control] button so it's lit.
The Sound Control function is switched on, enlivening the sound.
While holding down the [Sound Control] button, press the [-] or [+] button
2.
to change the type.
fig.d-1.eps
Setting
Turning Off Sound Control
1. Press the [Sound Control] button so its light is turned off.
NOTE
NOTE
42
Type
1 Sharp Creates a sound with boosted bass and treble.
2 Clear Produces a sound with chords in the low registers that are clear and distinct.
3 Power
Creates a sound with boosted bass.
You can have the FP-4 remember whether the [Sound Control] button should be on or
off when you turn on the power (p. 84).
For some sounds, this may cause distortion. If the sound distorts, refer to "Adjusting the
Volume (Master Gain)" (p. 85).
The Sound Control function is not applied to the sounds of external devices connected
to the Input jacks.
Description