Adding Reverberation To Sounds (Reverb Effect); Changing The Depth Of Reverb Effect - Roland FP-4 Owner's Manual

Performing

Adding Reverberation to Sounds (Reverb Effect)

You can apply a reverb effect to the notes you play on the keyboard. With the reverb
effect, you obtain a pleasant reverberation, making it sound as if you were performing
in a concert hall or similar space.
fig.Panel-Reverb.eps
1. Press the [Reverb] button so it's lit.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
Turning Off the Reverb Effect
1. Press the [Reverb] button so its light is turned off.

Changing the Depth of Reverb Effect

You can select from ten levels of depth for the reverb effect.
1. Hold down the [Reverb] button and press the [-] or [+] button.
The depth for the reverb effect appears in the display.
fig.d-2.eps
NOTE
NOTE
36
You cannot make separate reverb effect depth settings for each individual tone. The
same depth of reverb effect will apply to all sounds.
You cannot change reverb effect depth of Session Partner, Demo songs, and Internal
song.