Using Media Player - Panasonic Viera WT50A series Operating Instructions Manual

Using Media Player

Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory, and
contents recorded with this TV on the recording devices (SD Card / exclusive USB HDD).
Photo mode:
Still pictures recorded by digital cameras will be displayed.
Video mode:
(For SD Card or USB Flash Memory) Moving pictures recorded by digital video cameras and digital video data will be
played back.
Recorded TV mode:
(For SD Card / exclusive USB HDD) TV programmes recorded on the USB HDD / SD Card with this TV will be played
back.
Music mode:
Digital music data will be played back.
● During the operation, audio signal is output from AUDIO OUT, DIGITAL AUDIO OUT and HDMI2 (ARC function)
terminals. To use HDMI2 with ARC function, connect an amplifier that has ARC function (p. 89) and set to use theatre
speakers (p. 94).
●
[Date] shows the date on which the recording was made by the recording equipment. The file without record of the
date is shown "**/**/****".
●
The picture may not appear correctly on this TV depending on the recording equipment used.
● Display may take some time when there are many files and folders.
●
Partly degraded files might be displayed at a reduced resolution.
● Picture setting may not work depending on the conditions.
●
The folder and file names may be different depending on the digital camera or digital video camera used.
■
To insert or remove the SD Card / USB Flash Memory
●
For the USB HDD Connection
USB Flash Memory
SD Card
Gently insert the SD Card
with the label surface facing front.
Push until a click is heard.
● When connecting a USB device to the USB 1 port, there may be a difficulty to insert / remove
the SD Card. In this case, confirm a USB device is not active and insert / remove the SD Card
carefully.
● For the information of the devices
●
For the supported file format
66
(p. 62)
●
Ensure alignment is straight and complete when inserting or
removing.
●
Before removing the USB Flash Memory, ensure to perform "Safely
remove USB" (p. 24).
●
Connect the USB Flash Memory to the USB 1, 2 or 3 port.
●
Check the type of terminals and devices are correct when
connecting.
To remove, push it again.
"Devices for recording or playing back" (p. 102)
"Supported file format in Media Player and media servers" (p. 99, 100)
Cutout
●
●
●
●
Y
1