Panasonic Viera WT50A series Operating Instructions Manual page 65

■
To stop recording on the way
Confirm the code of the remote control to "73"
or
■
To play back or delete the recorded contents
●
Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD / SD
Card, it may not be available or the recording may not work properly while playback.)
Record constantly [REW LIVE TV]
(USB HDD only)
Records the current programme constantly.
Select [Auto] to start [REW LIVE TV]
Recording Setup
REW LIVE TV Auto
■
To operate [REW LIVE TV]
Confirm the code of the remote control to "73"
● ●
To pause To search backward (up to 90 minutes)
●
After pausing or searching backward, the following buttons are available to operate.
Search backward
Playback / pause
Search forward
Return to the current programme
■
To stop [REW LIVE TV]
Recording Setup
Off
REW LIVE TV
Auto
● [REW LIVE TV] will be stopped and the recorded content deleted automatically in the following conditions:
(Even if [REW LIVE TV] stops for the following conditions, as long as the setting is [Auto], the new recording will start
automatically in a condition that makes the recording available.)
Selected other channels
•
Selected locked channel
•
Selected invalid channel
•
(p. 32)
"Recorded TV mode" (p. 73)
select
access / store
(p. 32)
(Press and hold)
Search backward
/ forward
select [Off]
No TV signal
•
When the other recording starts
•
When the TV is turned to Standby or off
•
● When you select [Auto], the recording will
start automatically.
● This recording will not start if the other
recording is in progress, TV signal condition
is bad or any images are not displayed.
Pause /
Playback
playback current programme
●
If you stop [REW LIVE TV], the recorded
content for [REW LIVE TV] will be deleted.
Return to the
65