Panasonic Viera WT50A series Operating Instructions Manual page 43

Menu
3D Settings
Screen Display
Area Dimmer Control
,
Item
Adjusts and sets to view 3D images (p. 39)
Turns the screen off when you select [Off]
[Off] / [On]
● The sound is active even if the screen turns off.
●
Press any buttons (except Standby) to turn the screen on.
● This function is effective in reducing power consumption when listening to the
sound without watching the TV screen.
Automatically controls dark areas according to the images [Off] / [On]
● If the uncomfortable dark images occur, set to [Off].
●
This function is available when [Viewing Mode] is set to [Dynamic], [Normal] or
[Cinema].
Reproduces the original image quality in detail for 1080p (HDMI) input signal
1080p Pure Direct [Off] / [On]
●
Not valid on 3D mode
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth [Off] / [Min] / [Mid] / [Max]
●
Motion Picture Pro Depending on the contents, images may be noisy. To prevent the noise, change
the setting.
●
Not valid on PC mode or when [Viewing Mode] is set to [Game]
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Min] / [Mid] / [Max]
●
24p Smooth Film This is available only for 24p signal input and displayed instead of [Motion
Picture Pro].
●
Not valid on PC mode or when [Viewing Mode] is set to [Game]
Improves vertical resolution for movie images [Off] / [On]
Film Cadence
●
This function is available for the interlaced signal (except in the mode of PC,
Detection
VIERA Connect or when [Viewing Mode] is set to [Game]).
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear [Auto] / [100Hz] / [120Hz]
[100Hz]:
3D Refresh Rate If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
[120Hz]:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
If flicker noises appear with 50 Hz input signal.
Selects the screen area displaying the image [Off] / [On]
[On]:
Enlarges the image to hide the edge of the image.
[Off]:
Displays the image in the original size.
16:9 Overscan
●
Set to [On] if noise is generated on the edge of the screen.
● This function is available when aspect is set to [16:9].
●
This function can be memorised separately for SD (Standard definition) and HD
(High definition) signals.
●
Not valid on PC mode or VIERA Connect
Changes the black level of the image for HDMI input mode with DVI input signal
manually [Normal] / [Full]
●
When the DVI input signal from the external equipment (especially from PC) is
DVI Input Setting
displayed, the black level may not be suitable. In this case, select [Full].
●
The black level for HDMI input signal will be adjusted automatically.
● For HDMI input mode with DVI input signal
Adjustments / Configurations (alternatives)
43