Standby Mode - Electrolux WASL3T100 User Manual

36 how to run a wash cycle
End of the programme
The washing machine stops
automatically ; the "Start/Pause"
pushbutton goes out and "0" flashes on
the display. The locking mechanism
"snaps" twice to indicate that the lid is
open. The symbol disappears.
Turn the programme selector to the
"Stop" position.
Remove washing
Unplug and close water inlet tap.
We recommend leaving the lid and drum
open after use to ventilate the water
tank.

Standby mode

If the appliance is on but no commands
are selected for 10 min before or after a
cycle, it goes into standby mode. The
screen light goes out and "Start/Pause"
flashes slowly.
To exit standby mode, simply press any
pushbutton or turn the programme
selector.