Starting The Wash Programme - AEG LAVAMAT 84745 User Information

3. Push the detergent dispenser drawer in fully
If using liquid detergents/tablets:
3
Add liquid detergent or tablets in the quantity recommended by the
washing detergent manufacturer. Add liquid detergent with the dosage
container provided by the detergent manufacturer.

Starting the wash programme

1. Check that the water tap is open.
0
2. Starting the wash programme:
Press the START/PAUSE button.
The wash programme is started or starts after
the end of the time delay set.
The door is not correctly closed if, when the button START/PAUSE
3
is pressed,
– the error code Cd is shown in the multi-display and
– the indicators PRE WASH, RINSE and RINSE+ flash.
In this case, press the door firmly closed and again press the
START/PAUSE button.
If a delay start has been set:
The delay time set counts down, the remaining time until the start of
the programme is displayed in the multi display (in hours remaining).
During this time, you can add washing or change the delay time or
cancel it.
• Adding washing: Press the START/PAUSE button. The door can be
opened. Then close the door and press the START/PAUSE button
again.
• Changing or stopping the delay time: Press the DELAY TIMER button
until the desired time is displayed; when the duration of the pro-
gramme is displayed (e.g. 120 minutes) the wash programme starts
immediately.
Operating Instructions
25