Programme Protection - AEG LAVAMAT 84745 User Information

Programme Protection

To protect a programme setting against unintentional changes or tam-
pering (for example, programme selector turned or buttons pressed ac-
cidentally, etc.), set the Programme Protection. This will protect your
washing from damage.
The Programme Protection can be set or released at any time while the
3
programme is running.
Setting the Programme Protection:
0 1. Set the desired programme.
2. Press the START/PAUSE button to start the programme.
3. Press and hold the PRE WASH and SENSITIVE buttons at the same time,
for around 5 seconds. The programme progress display flashes for
5 seconds; the Programme Protection is now set.
No other settings can be selected as long as the Programme Protection
3
is active. The door cannot be opened. Also, when the wash cycle is com-
pleted, the Programme Protection must be released before the door can
be opened.
If one of the buttons is pressed to try to change the setting while the
wash programme is running, the programme progress display flashes
for 5 seconds.
If the programme selector is turned to try to change the setting, the
programme progress display flashes until the programme selector is re-
turned to its original setting. This does not affect the wash cycle.
The programme selector must be at the original position before the
3
Programme Protection can be cancelled.
Cancelling the Programme Protection:
0 Press and hold the PRE WASH and SENSITIVE buttons at the same time,
for around 5 seconds. The programme progress display flashes for
5 seconds, then remains lit steadily for 5 seconds. The Programme Pro-
tection is now released.
Operating Instructions
45