Setting The Delay Timer; Starting The Wash Programme; Programme Progress - AEG LAVAMAT W 1255 User Information

Setting the delay timer

The b (DELAY TIMER) button allows you to delay the start of a wash
programme.
Press the b (DELAY TIMER) button once if you
0
would like the wash programme to start in six
hours. The 6h display will illuminate.
Press the b (DELAY TIMER) button twice if you
0
would like the wash programme to start in
three hours. The 3h display will illuminate.
Press the b (DELAY TIMER) button once more
if you would like to cancel the delay timer. The
display will go out.
The delay timer that you have set is only activated when the wash pro-
3
gramme is started by pressing the O/s (START/PAUSE) button.
Note: If the delay timer has been set for six hours, the 6h display will
illuminate. After a period of 3 hours this display will change and the 3h
display will illuminate. The wash programme will start after a total of
6 hours.

Starting the Wash Programme

0 1. Check that the water tap is open.
2. To start the wash programme, press the O/s (START/
PAUSE) button. The wash programme starts.
If L (END) flashes 4 times when the O/s (START/
3
PAUSE) button is pressed, the door is not closed properly. In this case,
push the door in firmly, and press O/s (START/PAUSE) again.

Programme Progress

Programme Progress Display
Prior to the start, the programme steps chosen
are displayed by the programme progress display.
During the wash programme, the current programme
step is displayed.
Operating Instructions
21