Selecting The Bit Image Mode/Esc - Citizen PD24 Command Reference Manual

Selecting the bit image mode/ESC *

[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Selecting the bit image mode depending on the "m " value. (See chart below)
● n1, n2 indicates the number of dots in horizontal direction.
n1: Remainder of the number of dots divided by 256.
n2: Quotient of the number of dots divided by 256.
● The maximum number of dots in horizontal direction is as follows.
8 dots
24 dots
● The number of dots is defined by (n1 + n2 × 256). Therefore, the number of data that needs to be sent is
defined as follows.
When 'm' = 0, 1, 2, 3, 4, or 6:
When 'm' = 32, 33, 34, or 39:
ESC * m
27 42 m
1B 2A m
m = 0, 1, 2, 3, 4, 6, 32, 38, 39
0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 11
m Dot density in horizontal
(decimal)
EPSON
0
1 120DPI
2 120DPI
3 240DPI
4
6
32
33 120DPI
38
39 180DPI
n1 n2
n1 n2
n1 n2
direction
PD24
60DPI 101DPI
203DPI
203DPI
203DPI
80DPI 101DPI
90DPI 101DPI
60DPI 101DPI
203DPI
90DPI 101DPI
203DPI
n1 + n2 × 256
(n1 + n2 × 256) × 3
92
data
data
data
Maximum value for
n1+256×n2
416
832
832
832
416
416
416
832
416
832