Horizontal Tab [Ht]; Form Feed [Ff]; Descriptions Of Control Code - Citizen CBM-262 II Command Reference Manual

3. Descriptions of Control Code

Horizontal Tab [HT]

[ASCII] HT
[Decimal] 9
[Hexadecimal] 09
[Parameter]
[Description]
Shifts the printing position to the next horizontal tab position. The horizontal tab position is set by ESC D.
The initial setting is at intervals of 8 characters for Font A (at 9th, 17th, 25th, 33rd columns).
Printing and Line Feed [LF]
[ASCII] LF
[Decimal] 10
[Hexadecimal] 0A
[Parameter]
[Description]
By specifying the C/R operation set inside the printer, the operations will be as follows:
<In case of CR+LF>
If data exist inside the print buffer, line feed is performed after printout. Without data, only line feed is
performed. The next printing position becomes the head of line. If LF code is entered right after CR code, the LF
code will be ignored.
<In case of LF and being ignored>
If data exist inside the print buffer, line feed is performed after printout. Without data, only line feed is
performed. The next printing position becomes the head of line.
Even if LF code is entered right after CR code, the LF code will not be ignored.

Form Feed [FF]

[ASCII] FF
[Decimal] 12
[Hexadecimal] 0C
[Parameter]
[Description]
Executes a batch printout of the data mapped in the print area and returns to STANDARD MODE. All data is
erased after printout.
This command is effective only in PAGE MODE.
CITIZEN
TITLE:
PB-32/33
SHEET
REVISION
B
HT
LF
FF
4
4/85