Casio PJ Camera Software 1.2 User Manual page 114

PJ Camera Software Operating Environment
■ [Display Startup Dialog Box] button
Click this button to display the Startup Mode dialog box whenever PJ Camera Software is
started up. The settings you can configure with the Startup Mode dialog box are described
below.
Select the button next to the startup
mode you want to use by clicking it.
Clear this check box if you want the
Startup Mode dialog box to appear
each time you start up PJ Camera
Software, or select the check box if
you do not want the Startup Mode
dialog box to appear.
After configuring the settings you want, click the [OK] button.
If you changed the startup mode setting, the startup mode change as soon as you click
[OK].
For information about startup modes, see "PJ Camera Software Startup Modes"
(page 13).
114