To Load 1-Ply Paper For Printing Of Receipts - Casio PCR-360 Operator's Instruction Manual

7.
Install receipt/journal paper (continued...)

To load 1-ply paper for printing of receipts

Roll paper spindle
Paper separator
Paper inlet
X
CAL
REG Z
OFF
RF
PGM
1 1 1 1 1
Use a mode key to set the
mode switch to REG posi-
tion
2 2 2 2 2
Remove the printer cover
3 3 3 3 3
Cut off the leading end of the
paper so it is even.
4 4 4 4 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
1
2
11
5 5 5 5 5
Work the paper roll gently
between the two spindles so
that they slip into the center
hubs of the roll.
6 6 6 6 6
Pass paper over silver plate.
7 7 7 7 7
Press the f key until about
20 cm or 30 cm of paper is
fed from the printer.
8 8 8 8 8
Replace the printer cover,
passing the leading end of
the paper through the cutter
slot. Tear off the excess pa-
per.