Adjusting The Picture Preference; Picture Control Adjustment - Sansui HDLCD3200B Owner's Manual

A B C D E F G - - - - - - - - - - - - - - - -
Wide picture size (for 4:3 format programs)
To fill the screen, the right and left edges are
extended, however; the center of the picture remains
near its former ratio.
The top and bottom edges of the picture may be
hidden.
Cinema picture size (for letter box
programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion).
The top and bottom edges of the picture may be
hidden.
A B C D E F G - - - - - - - - - - - - - - - -
NOTE:
• Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
• In HDMI or COMPONENT mode with a scanning
rate of 720p or 1080i, only the Normal and Cinema
picture size features are available.
• In PC mode, only the Normal and Wide picture size
features are available.
• In Cinema picture size, some of the on screen
display items may be positioned off the visible
portion of the screen.
Adjusting the picture
preference
You can select four picture modes—Vivid,
Standard, Movie and User—as described in the
following table:
1
Press MENU. Then press ▲ or ▼ to select
"Picture" menu, then press ▶.
2
Press ▲ or ▼ to select "Picture Mode".
3
Press ▶ or ENTER to select the item you want to
adjust.
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
Picture Mode
Picture
Contrast 80
Brightness 50
Sharpness 50
Audio
Color 50
Tint 50
Setup
Picture Size
Feature To Move To Select
Enter
Mode Picture Quality
Vivid Bright and dynamic picture (factory-set)
Standard Standard picture quality (factory-set)
Movie Movie-like picture setting (factory-set)
User
Your personal preferences (set by you;
see "Picture control adjustment" below).
4
After your desired setting, press MENU to return
to the normal screen.

Picture control adjustment

1
Press MENU. Then press ▲ or ▼ to select
"Picture" menu, then press ▶.
2
Press ▲ or ▼ to select the item you want to
adjust, then press ▶ or ENTER.
Press ◀ or ▶ to adjust the setting.
Picture Mode
Picture
Contrast 100
Brightness 50
Sharpness 50
Audio
Color 50
Tint 50
Setup
Picture Size
Feature
To Move Enter To Select
Contrast
• Press ▲ or ▼ to change the adjusting item.
Contrast decrease
contrast
Brightness decrease
brightness
Sharpness makes picture
softer
Color be pale color
Tint be greenish
color
3
After your desired setting, press MENU to return
to the normal screen.
NOTE:
• The CONTRAST default setting is set to maximum
at the factory.
Standard
Wide
Menu To Exit
Vivid
Wide
Menu To Exit
56
◀ ▶
increase
contrast
increase
brightness
makes picture
clearer
be brilliant color
be reddish color
23