Tv Operation - Sansui HDLCD3200B Owner's Manual

Tuning Band
Picture
DTV Signal
Auto Ch Search
Add On Ch Search
Audio
Manual Ch Set
Channel Labels
Setup Menu Language
Reset
Feature To Move Enter
3
Press ▶ or ENTER. The TV will begin searching
only blank, unregistered channels.
• It may take from 15 minutes to 30 minutes to
complete memorizing digital cable channels.
Depending on the reception condition, a BAR
display may not advance for several minutes,
please be patient.
NOTE:
• Memorizing channels is best accomplished during
evening "PRIMETIME" hours, as more stations are
broadcasting digital signals. Memorizing channels
can only be accomplished while a station is
broadcasting a digital signal to set that channel into
memory.
• If you are unsure of the digital channels available
in your area, you may visit www.antennaweb.org to
receive a list based on your address or zip code.
Should you require further assistance you may call
our toll-free customer service line at 1-800-289-
0980.
• New digital channels may be added to your area
periodically, it is recommended to perform the "Add
On Ch Search" procedure regularly.
Manual Ch Set
You can select the channel that you want to skip.
1
Press MENU. The menu screen will appear.
2
Press ▲ or ▼ to select "Setup" menu, then press
▶.
Press ▲ or ▼ to select "Manual Ch Set", then
press ▶ or ENTER.
Manual Ch Set menu will appear.
3
Press ▲ or ▼ to select the channel that you want
to skip, then press ENTER.
Manual Channel Set Menu
Ch 7-0
Ch 7-0
Ch 11-0
Ch 12-0
Ch 22-0
Ch 23-0
Ch 23-1
Ch 23-2
Ch 23-3
Ch 23-4
Ch 23-77
Ch 23-999 CH-999
4
Press MENU to return to the normal screen.

TV operation

1
To turn on the TV, press POWER.
(POWER indicator on the front of the unit blinks
while starting. It may take approx. 15 seconds for
a picture to appear on screen.)
18
Cable
English
To Select Menu To Exit
Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
CH-1 Viewable
CH-2 Viewable
CH-3 Viewable
CH-4 Viewable
CH-77 Viewable
Viewable
To Move Enter To Select Menu To Exit
2
Adjust the volume level by pressing VOL + or – .
The volume level will be indicated on the screen
by white bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of white bars also decreases.
3
Set the Tuning Band menu option to the
appropriate position (see "Air/Cable selection" on
page 17).
4
Press the Direct Channel Selection (0-9, –)
buttons to select the channel, then press ENTER.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS
1-9: Press 1-9 as needed. Example, to
select channel 2, press 2.
10-99: Press the 2 digits in order. Example, to
select channel 12, press 1, 2.
100-135: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the – button,
followed by the remaining number.
Example, to select channel 015-001, press 0, 1,
5, –, 1.
• If a channel is selected with only audio content,
"Audio only" will be displayed on the screen.
• If a channel is selected with a weak digital
signal, "Digital channel signal strength is low"
will be displayed on the screen.
If the digital channel has the same analog
channel, you way be able to watch the same
channel with analog.
• If a channel is selected to which you have not
subscribed, "Digital channel is encrypted" will
be displayed on the screen.
VHF/UHF/CABLE CHANNELS
Air
VHF
2-13
UHF
14-69 14-36
37-59
60-85
86-94
95-99
100-135
NOTE:
• If a channel with no broadcast is selected, the
sound will automatically be muted.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
To select the video input source
Press INPUT SELECT to view a signal from another
device connected to your LCD TV, such as a VCR
or DVD player. You can select ANT, Composite1,
Composite2, S-Video, Component, HDMI1, HDMI2
or PC depending on which input jacks you used to
connect your devices.
Cable
VHF
2-13
STD/HRC/IRC
(A) (W)
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
(A-5) (A-1)
(100) (135)
01 (5A)